Steps that take a hillside in safe, even strides, footed solid into the rock and tied clean to the house. On a lake lot that falls toward the water, the stairs are doing real work, so we build them to handle the grade and feel right underfoot.
Credibility comes from how it's built, not from promises. Here's the order of operations on every concrete steps & stairs job.
Steps start on a footing that finds real bearing. Around Jonestown that usually means setting into the shallow limestone or caliche so the stairs do not work loose, and on a hillside run we make sure each footing carries its share of the grade rather than leaning on the soil below it.
Riser heights are held consistent and within local code so each step lands where your foot expects it and climbs safely, which counts double on a long flight working down a slope toward the water.
Reinforcement run through the pour keeps the corners and step noses from breaking away as the ground around a hillside stair settles and shifts season to season.
A broom or textured surface gives grip when a storm or a wet boat day leaves the stairs damp, and we add grit anywhere a steep run earns it.
We blend the new work into the existing porch, slab, or walkway, and where a flight steps a slope we set it so it reads as one continuous run from the door to the lower yard.
Most contractors vanish after the deposit. We pick up the phone, show up when we say, and stand behind the work after the truck leaves. The follow-through is the difference.
A foreman we know runs your job and a vetted crew does the work, managed by Lucky's, one company accountable from the first call to the final walkthrough.
COI and lien waivers on file before we break ground. The documentation that lets commercial clients pay and gives homeowners peace of mind.
Prepped subgrade, reinforced and mixed to spec for the job, and proper curing. We build credibility through the process, not promises. On concrete steps & stairs, that starts with foot it into solid rock.
Steps are usually priced per set rather than per square foot, going on the riser count, the footing work the ground calls for, and how they meet the house and the grade. A hillside run that steps a slope toward the lake, or one footed into shallow limestone, takes more than a short flat stoop. As a rough starting point, plan on something like $300 to $500 per step. We lock in a firm number after we have walked the entry and read the slope.
Around here it usually traces back to the footing. Steps set shallow on loose soil instead of into the rock work themselves loose as the ground settles, and on a slope that is even quicker, since the grade is always nudging things downhill. We foot the stairs into solid bearing so they hold where they belong.
We hold the risers even and inside local code so each step feels identical as you climb. Uneven risers are awkward and a trip hazard, and that gets serious on a long hillside flight where a missed step has a slope waiting below it.
It hangs on the damage. Surface chips and light spalling can sometimes be patched, but steps that have drifted off their footing or have broken risers usually need a rebuild on a proper base, especially on a grade. We tell you plainly which of the two you are looking at.
We pour and finish the steps and set the anchor points for a railing, then coordinate the install so the stairs meet your access and safety needs, which is worth nailing down on a steep run heading down to the water.
Foot traffic typically waits a few days while the concrete builds strength, and a summer pour has to cure instead of bake dry. We talk you through the timeline for your particular pour before we start.
You'll hear back from a real person, usually the same day. No call center, no runaround, no chasing us down.
Booking up fast this season. Or call (512) 400-3545